|
| |
Publications in Computational Fracture Mechanics Citing the
Use of CFG Software
The CFG has made its software publicly available to research collaborators
worldwide. Below is a partial list of publications which cite the use of CFG
software in the R&D described in the publication.
 | Fersini, D. and
Pirondi, A. Fatigue behavior of Al2024-T3 friction stir welded lap joints,
EFM, Vol 74, (2007) 468-480. |
| Carpinteri, A.
and Pugno, N. Cracks and re-entrant corners in functionally graded
materials, Engineering Fracture Mechanics, Vol 73, No 10, (2006)
1279–1291. |
| J.F. Labuz, J.J.
Riedel, S.T. Dai. Shear fracture in sandstone under plane-strain
compression. Engineering Fracture Mechanics, Vol 73, No 6, (2006)
820–828. |
| Barlow, K.W. and
Chandra, R. Fatigue crack propagation simulation in an aircraft engine
fan blade attachment. International Journal of Fatigue 27 (2005)
1661–1668. |
|
Carpinteri, A., Bernardino, C., Invernizzi, S. Numerical analysis of
indentation fracture in quasi-brittle materials. Engrg. Fract. Mech., 71
(2004) 567-577. |
| Kim, J. and
Paulino, G. Mixed-mode fracture of orthotropic functionally graded materials
using finite elements and the modified crack closure method, EFM, Vol 69,
(2002) 1557-1586. |
|
Germanovich, L., Dyskin, A V., Fracture mechanisms and instability of in
compression. Int. J. Rock Mech. Min. Sci. 37 (2000) 263-284. |
|
Chen B., Dillard, D A., Numerical analysis of directionally unstable crack
in adhesively bonded joints. Int. J. Solids Structures 38 (2001) 6907-6924. |
| Meshii, T., Watanabe, K., "Stress Intensity Factor Error Index for Finite
Element Analysis with Singular Elements", Engr. Fract. Mech., 70 (2003) 657-669. |
| Riddell, W., "Probabalistic Growth of Complex Fatigue Crack Shapes: Toward
Risk Based Inspection Intervals for Railroad Tank Cars", to appear in ASTM STP
&&&, 2001. |
| Heuer DA, Mann KA "Fatigue fracture of the stem-cement
interface with a clamped cantilever beam test", Journal of Biomechanical
Engineering -Transactions of the ASME 122 (6): 647-651 DEC 2000. |
| Mann KA, Bhashyam S., "Mixed-mode fracture toughness of the cobalt-chromium
alloy polymethlymethacrylate cement interface", Journal of Orthopedic
Research,17 (3): 321-328 MAY 1999 |
| Cope, D. Johnson, P. Trego, A. West, D., "Analytical Framework for Assessment
of Corrosion and Fatigue in Fuselage Lap Joint", Proc. 2nd Joint
NASA/FAA/DoD Conf. Aging Aircraft, C. Harris, Ed.,NASA/CP-19999-208982/Part2,
472-481, 1999. |
| Yngvesson, M., Nilsson, F., "Fatigue Crack Grwoth of Surface Cracks under
Non-Symmetric Loading",Engrg. Fract. Mech., 63, 375-393,1999. |
| Koenke, C., Harte, R., Kratzig, W. B., Rosenstein, O., "On Adaptive Remeshing
Techniques for crack simulation Problems", Engineering Computations,
15,1,74-88,1998. |
| Gálvez, J. C., Cendón, D. A., Planas, J., Guinea, G. V., and Elices, M.,
"Fracture of Concrete Under Mixed Loading. Experimental Results and Numerical
Prediction," Proceedings, Third International Conference on Fracture
Mechanics of Concrete and Concrete Structures, International Association for
Fracture Mechanics of Concrete and Concrete Structures (IAFraMCos), Gifu, Japan,
Vol. 1, pp. 729-738, 1998. |
| L.T. Kuhn, H. Kessler, R. Ballarini, A.H. Heuer and S.M. Spearing, "Fracture
Mechanisms of the Strombus Gigas Conch Shell: Implications for the Design of
Brittle Laminates," Journal of Materials Science, Vol. 31, pp. 6583-6594, 1996. |
| D.G. Lewicki and R. Ballarini, "Effect of Rim Thickness on Gear Crack
Propagation Path," ASME Journal of Mechanical Design, Vol. 119, pp. 88-95, 1997. |
| D.G. Lewicki and R. Ballarini, "Rim Thickness Effects on Gear Crack
Propagation Life," International Journal of Fracture, Vol. 87, pp. 59-86,1997. |
| Estupinan, J., Bartel, D., "Residual Stress Field Around Subsurface Void in
UHMWPE Loaded by Moving Indenter as Site for Fatigue Crack Propagation", to
appear in the Proceedings of the 42nd Annual Meeting, Orthopaedic Research
Society, Atlanta, February, 1996. |
| Fischer, M., Elsworth, D., Alley, R., Engelder, T., " Finite Element Analysis
of the Modified Ring Test for Determining Mode I Fracture Toughness", Int. J.
Rock Mech. Min. Sci. & Geomech. Abstr., 33, 1, 17-37, 1996. |
| Rooks, M. J., Tiberio, R. C., Chapman, M., Hammond, T., Smith, E., Lenef, A.,
Rubenstein, R., Pritchard, D., Adams, S., " Coherence of Large Gratings and
Electron-Beam Fabrication Techniques for Atom-Wave Interferometry", J. Vac. Sci.
Technol. 13(6), 2745,-2751, 1995. |
| Elbert, K., Wright, T., Rimnac, C., Klein, R., Ingraffea, A. R., Gunsallus,
K., Bartel, D., "Fatigue Crack Propagation Behavior of Ultra High Molecular
Weight Polyethelene under Mixed Mode Conditions", to appear in the Journal of
Bio-Medical Research, 1994. |
| G. Ferrante, R. Ballarini and J.L Figueroa, "Analytical and Experimental
Analyses of Fatigue Crack Propagation in Asphalt Concrete Overlays," Proceedings
of ASCE Structures Congress '94, Atlanta, Georgia, April 24-28, 1994.
|
| D. S. Dawicke, E. P. Phillips, D. V. Swenson, S. Gondhalekar, "Crack Growth
from Loaded Rivet Holes", Durability of Metal Aircraft Structures: Proc. Int.
Workshop Struct. Integrity Aging Airplanes, S. N. Atluri et al, eds., Atlanta
Technology Publications, Atlanta, 1992. |
| Mann, K.A., Bartel, D.L., Wright, T.M. and Ingraffea, A.R., "Mechanical
Characteristics of the Stem-Cement Interface", J. Ortho. Research, 9, 798-808,
1991. |
| J. Cl. DeBremaecker, D. V. Swenson, "Origin of Overlapping Spreading Centers:
A Finite Element Model," Tectonics, 9, 3, 505-519, 1990. |
| D. V. Swenson, Nanda Kaushik, "Finite Element Analysis of Edge Cracking in
Plates," , Engineering Fracture Mechanics, 37, 3, 641-652, 1990.
|
|
